Sony MKS-2010 User Manual

Ch
apt
e

r 2   

N

a

mes

 and

 Fun

c

tions
 of
 P

a

rt

s

24

“Memory Sticks”

Installing a second power supply requires the optional HK-
PSU11 Power Supply Unit.

b “Memory Stick” status indicator
Lights in red during access to a “Memory Stick.”

c “Memory Stick” slot
Insert “Memory Sticks.”

See ““Memory Sticks”” (page 24) for more information 
about the usable “Memory Sticks” and their handling.

d USB connector
Devices compatible with the USB 1.1 standard can be 
connected. Currently this connector is not used.

The following types of “Memory Stick” can be used with 
this system.
• MSH-32/64/128 “Memory Stick”
• MSX-256S/512S/1GS “Memory Stick PRO”
• MSH-M32N/M64N/M128N “Memory Stick Duo”
• MSX-M256S/M512S “Memory Stick PRO Duo”

• When using a “Memory Stick PRO,” high-rate data 

transfer using parallel interface is not supported.

• This system does not support the MagicGate function.
• When using a “Memory Stick Duo,” be sure to use it 

with a “Memory Stick Duo Adaptor” (MSAC-M2 or 
equivalent). If you insert a “Memory Stick Duo” without 
using the adaptor, there is the possibility that the stick 
cannot be removed, resulting in a serious accident.

When using “Memory Sticks,” pay attention to the 
following points.
• Do not touch the connector of the “Memory Stick” with 

anything, including your finger or metallic objects.

• Do not attach anything other than the supplied label to 

the “Memory Stick” labeling position.

• Attach the label so that it does not stick out beyond the 

labeling position.

• Carry and store the “Memory Stick” in its case.
• Do not strike, bend, or drop the “Memory Stick.”
• Do not disassemble or modify the “Memory Stick.”
• Do not allow the “Memory Stick” to get wet.
• Do not use or store the “Memory Stick” in a location that 

is:
-Extremely hot, such as in a car parked in the sun
-Under direct sunlight
-Very humid or subject to corrosive substances