Sony MKS-2010 User Manual

Page of 200
Cha
p
te
r 5  
 Ba
si
c Op
erat
io
ns
60
Selecting Effects
5
Press the button for the desired pattern.
The effect pattern is confirmed, the popup window closes, and you are 
returned to the Main menu.
Effect Types
About effect pattern numbers
The effects available on this system can be selected with 4-digit effect pattern 
numbers. These numbers can generally be classified as shown below. In general 
this manual calls all effects simply as “effects,” but when it refers to effects used 
on the PGM/PST bank, it calls them as “wipes.”
a) DME option must be installed.
Note
Effects numbered 1001 and higher cannot be used when:
• Multiple next transition selections have been made.
• Key priority ([KEY PRIOR]) has been selected as the transition type.
Transition effects and non-transition effects
Effects numbered 1001 and higher fall into the following two types, depending 
on what occurs when the effect is executed.
Transition effects (slides, page turn, etc.): A bus and B bus cross-points are 
switched by executing a transition. Also, when border, cropping, or other 
modifications
 1)
 have been added, they disappear as soon as the transition 
ends. 
1) Modifications listed in “Effect Pattern Transformations and Modifications” in the Appendix 
(separate document).
Yes: Available for use
No: Not available for use
Type
Effect 
pattern 
numbers 
M/E
PGM/PST
Wipes
0001 to 0661
Yes 
Standard group patterns 
only (0001 to 0024) 
NAM
0901
Yes Yes 
Super mix
0902
Yes 
Yes 
Effects using 
DME
1-channel effects
1001 to 1999
Yes 
a)
No
2-channel effects
2001 to 2999
Yes 
a)
No