GarrettCom 500-Series User Manual

Magnum 500-Series Switching Hubs

Installation and User Guide (08/98)

3

Switching Hub, eight ports at 10Mb F/H plus two 100Mb 
Fast Ethernet ports (F/H and 10/100).  Self-learning 2K 
node-capacity address table, Store and Forward operation 
to filter all errored frames, full wire-speed filtering and 
forwarding among all ports. Up-link switch on 10Mb port 
# 8.   Internal auto-ranging power supply.

(The copper Fast Ethernet ports can be manually set to 
the desired mode, or may optionally be set for support of 
10/100 and F/H IEEE 802.3u standard auto-negotiation).

 Same as Model 528, but with  a 100BASE-FX fiber port, 
multi-mode SC connector, and a 100Mb RJ-45 port.

 Same as Model 528, but with  a 100BASE-FX fiber port, 
multi-mode ST connector, and a 100Mb RJ-45 port.

Magnum 528F-SMSC  Same as Model 528, but with  a 100BASE-FX fiber port, 

single-mode SC connector, and a 100Mb RJ-45 port.

Magnum 528F-SMST  Same as Model 528, but with  a 100BASE-FX fiber port, 

single-mode ST connector, and a 100Mb RJ-45 port.

Same as Model 528 but without the 2 Fast Ethernet ports

.

Eight 10Mb switched ports (no 100Mb ports)

Garrett Communications reserves the right to change specifications, performance

characteristics and/or model offerings without notice.