Avaya C460 User Manual
Chapter 2 Avaya C460 CLI Commands
Avaya C460 Reference Guide
113
Example:
set port powerinline
User level: read-write, admin.
Use the set port powerinline command to enable or disable the load detection
process on the port.
Use the set port powerinline command to enable or disable the load detection
process on the port.
The syntax for this command is:
set port powerinline
<module_number/port_number> {enable |
disable}
Example:
To enable PoE on ports 1 to 3 of module three:
To enable PoE on ports 1 to 3 of module three:
set port powerinline priority
User level: read-write, admin.
Use the set port powerinline priority command to set the priority level
for powering the port.
Use the set port powerinline priority command to set the priority level
for powering the port.
The syntax for this command is:
set port powerinline
<module_number/port_number> <priority>
C460-1# set port point-to-point admin status 1/1 force-true
port 1/1 point to point admin status is set to force-true
module
Number of the module (3-6).
port
Number of the port on the module. If you do not specify a
number, all the ports on the module are shown.
You can also specify a range of ports separated by a dash, for
example, 4/5-13 for ports 5 to 13 on module 4.
number, all the ports on the module are shown.
You can also specify a range of ports separated by a dash, for
example, 4/5-13 for ports 5 to 13 on module 4.
enable
Enable load detection on the port
disable
Disable load detection on the port
C460-1# set port powerinline 3/1-3 enable
Load detection process on ports 3/1-3 is enabled
module
Number of the module (3-6).