Avaya C460 Manual Do Utilizador

Chapter 2        Avaya C460 CLI Commands

Avaya C460 Reference Guide

113

Example:

User level: read-write, admin.
Use the set port powerinline command to enable or disable the load detection 
process on the port.

The syntax for this command is:

 <module_number/port_number> {enable | 

disable}

Example:
To enable PoE on ports 1 to 3 of module three:

User level: read-write, admin.
Use the set port powerinline priority command to set the priority level 
for powering the port.

The syntax for this command is:

 <module_number/port_number> <priority>

C460-1# set port point-to-point admin status 1/1 force-true

port 1/1 point to point admin status is set to force-true

module

Number of the module (3-6). 

port

Number of the port on the module. If you do not specify a 
number, all the ports on the module are shown.
You can also specify a range of ports separated by a dash, for 
example, 4/5-13 for ports 5 to 13 on module 4.

enable

Enable load detection on the port

disable

Disable load detection on the port

C460-1# set port powerinline 3/1-3 enable

Load detection process on ports 3/1-3 is enabled

module

Number of the module (3-6).