Avaya P332MF User Manual
Chapter 6
CLI – Layer 2
Avaya P332MF User’s Guide
129
This operation may take a few minutes...
Please refrain from any other operation during this time.
For more information , use 'upload status' command
********************************************************************
* If you are currently running the P330 Device Manager application,*
* it is recommended to exit from it before performing configuration*
* download operations. *
********************************************************************
copy module-config tftp
Use the
copy module-config tftp
command to upload the switch-level
parameters from the current NVRAM running configuration into a file via TFTP.
If an error occurred during upload (you can check this using the command
If an error occurred during upload (you can check this using the command
show
tftp upload status
) you must fix the problem. The following is a list of
possible problems:
a
You did not create an empty text file at the destination server (0 Bytes).
b
You do not have the correct path to the file.
c
The destination server is not active/on.
d
The destination server is unreachable.
Then, perform the upload procedure again twice as follows:
a
Delete the destination file and recreate a correctly named empty file at the
destination server (0 Bytes)
destination server (0 Bytes)
b
Type the command
copy module-config tftp
for the first time.
c
Delete the destination file and recreate a correctly named empty file at the
destination server (0 Bytes)
destination server (0 Bytes)
d
Type the command
copy module-config tftp
again, a second time.
The syntax for this command is:
copy module-config tftp <filename> <ip> <mod_num>
Output Example:
P330-N# copy module-config tftp c:\config\switch1.cfg
192.168.49.10 5
192.168.49.10 5
Beginning upload operation ...
This operation may take a few minutes...
Please refrain from any other operation during this time.
filename
The file name (full path)
ip
The IP address of the TFTP server
mod-num
The switch number