Avaya P332MF Manuel D’Utilisation

Chapter 6

CLI – Layer 2

Avaya P332MF User’s Guide

129

This operation may take a few minutes...

Please refrain from any other operation during this time.

For more information , use 'upload status' command

********************************************************************

* If you are currently running the P330 Device Manager application,*

* it is recommended to exit from it before performing configuration*

* download operations.                                             *

********************************************************************

Use the

 copy module-config tftp 

command to upload the switch-level 

parameters from the current NVRAM running configuration into a file via TFTP.
If an error occurred during upload (you can check this using the command 

show 

tftp upload status

) you must fix the problem. The following is a list of 

possible problems:

a

You did not create an empty text file at the destination server (0 Bytes).

b

You do not have the correct path to the file.

c

The destination server is not active/on.

d

The destination server is unreachable.

Then, perform the upload procedure again twice as follows:

a

Delete the destination file and recreate a correctly named empty file at the 
destination server (0 Bytes)

b

Type  the  command 

copy module-config tftp

 for the first time.

c

Delete the destination file and recreate a correctly named empty file at the 
destination server (0 Bytes)

d

Type  the  command 

copy module-config tftp

 again, a second time.

The syntax for this command is:

copy module-config tftp <filename> <ip> <mod_num>

Output Example:

P330-N# copy module-config tftp c:\config\switch1.cfg 
192.168.49.10 5

Beginning upload operation ...

This operation may take a few minutes...

Please refrain from any other operation during this time.

filename

The file name (full path)

ip

The IP address of the TFTP server

mod-num

The switch number