Denon AVP-A1HD User Manual

Make detailed settings for various parameters.

Use this procedure to set the speakers manually
or if you wish to change the settings made with
the Auto Setup procedure.

F Menu tree F

a

s

d

f

g

h

 

Manual Setup 

Select front speaker size.

a

Select speaker configuration and size.
(bass reproduction capability)

Select center speaker use and size.

Select subwoofer use.

Select surround speakers use and size.

Select surround back speaker use and size.

• Select “Large” or “Small” not according to the physical size of the

speaker but according to the low frequency reproduction capabilities
based  on  the  frequency  set  at  “Crossover  Frequency”  (

vpage

25).

• When “Front” is set to “Small”, “Subwoofer” is automatically set to

“Yes”.

• If  “Subwoofer”  is  set  to  “No”,  “Front”  is  automatically  set  to

“Large”.

• If “Surround” is set to “None”, “Surround Back”, “Front Height” and

“Front Wide” are automatically set to “None”.

• When using just one surround back speaker, connect it to the left

channel (SBL).

• To take full advantage of the performance of the Home THX certified

speaker  systems,  set  the  front,  center  and  surround  speaker  size
parameters to “Small” and the subwoofer to “Yes”.

• “Front Height” can be set when the “Option Setup” – “Amp Assign”

– “Assign  Mode”  setting  (

vpage  28)  in  the  GUI  menu  is “Front

Height”,  or  the  “Option  Setup”  –  “Amp  Assign”  –  “Extension
Channel” setting (

vpage 28, 29) is set to “Front Height”.

• “Front Wide” can be set when the “Option Setup” – “Amp Assign”

– “Assign  Mode”  setting  (

vpage  28)  in  the  GUI  menu  is “Front

Wide”, or the “Option Setup” – “Amp Assign” – “Extension Channel”
setting (

vpage 28, 29) is set to “Front Wide”.

: Use  a  large  speaker  that  can  adequately  play  back  low

frequencies.

: Use a small speaker that has inadequate playback capacity

for low frequencies.

Select front height speaker use and size.

Select front wide speaker use and size.