ZyXEL Communications XGS-4526 User Manual

 Chapter 24 Multicast

XGS-4526/4528F/4728F User’s Guide

Use the MVR screen to create multicast VLANs and select the receiver port(s) and 
a source port for each multicast VLAN. Click Advanced Applications > 
Multicast > Multicast Setting > MVR link to display the screen as shown next. 

Note: You can create up to five multicast VLANs and up to 256 multicast rules on the 

Switch.

Note: Your Switch automatically creates a static VLAN (with the same VID) when you 

create a multicast VLAN in this screen.

Figure 104   Advanced Application > Multicast > Multicast Setting > MVR 

The following table describes the related labels in this screen. 

Table 66   Advanced Application > Multicast > Multicast Setting > MVR 

Active

Select this check box to enable MVR to allow one single multicast VLAN 
to be shared among different subscriber VLANs on the network. 

Name

Enter a descriptive name (up to 32 printable ASCII characters) for 
identification purposes. 

Multicast VLAN 
ID

Enter the VLAN ID (1 to 4094) of the multicast VLAN.