ZyXEL Communications XGS-4526 User Manual

 Chapter 49 Cluster Management

XGS-4526/4528F/4728F User’s Guide

You can use FTP to upload firmware to a cluster member switch through the 
cluster manager switch as shown in the following example.

Figure 237   Example: Uploading Firmware to a Cluster Member Switch 

The following table explains some of the FTP parameters.

C:\>ftp 192.168.1.1

Connected to 192.168.1.1.

220 Switch FTP version 1.0 ready at Thu Jan  1 00:58:46 1970

User (192.168.0.1:(none)): admin

331 Enter PASS command

Password:

230 Logged in

ftp> ls

200 Port command okay

150 Opening data connection for LIST

--w--w--w-   1 owner    group         3042210 Jul 01 12:00 ras

-rw-rw-rw-   1 owner    group          393216 Jul 01 12:00 config

--w--w--w-   1 owner    group               0 Jul 01 12:00 fw-00-a0-c5-01-23-46

-rw-rw-rw-   1 owner    group               0 Jul 01 12:00 config-00-a0-c5-01-23-46

226 File sent OK

ftp: 297 bytes received in 0.00Seconds 297000.00Kbytes/sec.

ftp> bin

200 Type I OK

ftp> put 370lt0.bin fw-00-a0-c5-01-23-46

200 Port command okay

150 Opening data connection for STOR fw-00-a0-c5-01-23-46

226 File received OK

ftp: 262144 bytes sent in 0.63Seconds 415.44Kbytes/sec.

ftp>

Table 164   FTP Upload to Cluster Member Example 

User

Enter “admin”. 

Password 

The web configurator password default is 1234.

ls

Enter this command to list the name of cluster member 
switch’s firmware and configuration file.

370lt0.bin 

This is the name of the firmware file you want to upload to 
the cluster member switch.

fw-00-a0-c5-01-23-46

This is the cluster member switch’s firmware name as seen 
in the cluster manager switch.

config-00-a0-c5-01-23-46

This is the cluster member switch’s configuration file name 
as seen in the cluster manager switch.