ZyXEL Communications GS-1548 User Manual

Chapter 5 System

GS-1524/GS-1548 User’s Guide

Use the Configure IP Address screen to set up the IP address manually. The following screen 
appears when you click the existing IP address in the System > Status screen.

Figure 22   Configure IP Address 

The following table describes the labels in this screen.

L2 Table Aging defines the aging time of the Address Resolution Logic (ARL) table. This 
table learns and remembers MAC addresses of devices sending information through it. See 

 for more background information. Click the link in the L2 Table Aging 

field to see the screen as shown next.

Figure 23   Configure L2 Table Aging 

Backup settings Click this link to create and save a backup configuration file. See 

Restore 

settings

Click this link to upload an existing configuration file to the Switch. See 

Table 5   System  (continued)

Table 6   Configure IP Address

IP Address

Enter the IP address of your Switch in dotted decimal notation. 

For example, 192.168.1.1. 

Network Submask

Enter the IP subnet mask of your Switch in dotted decimal 

notation for example 255.255.255.0. 

Gateway

Enter the IP address of the default outgoing gateway in dotted 

decimal notation, for example 192.168.1.5.