Справочник Пользователя для ZyXEL Communications GS-1548
Chapter 5 System
GS-1524/GS-1548 User’s Guide
50
5.1.1 Configure IP Address
Use the Configure IP Address screen to set up the IP address manually. The following screen
appears when you click the existing IP address in the System > Status screen.
appears when you click the existing IP address in the System > Status screen.
Figure 22 Configure IP Address
The following table describes the labels in this screen.
5.1.2 Layer 2 (L2) Table Aging
L2 Table Aging defines the aging time of the Address Resolution Logic (ARL) table. This
table learns and remembers MAC addresses of devices sending information through it. See
table learns and remembers MAC addresses of devices sending information through it. See
for more background information. Click the link in the L2 Table Aging
field to see the screen as shown next.
Figure 23 Configure L2 Table Aging
Backup settings Click this link to create and save a backup configuration file. See
Restore
settings
Click this link to upload an existing configuration file to the Switch. See
Table 5 System (continued)
LABEL
DESCRIPTION
Table 6 Configure IP Address
LABEL
DESCRIPTION
IP Address
Enter the IP address of your Switch in dotted decimal notation.
For example, 192.168.1.1.
Network Submask
Enter the IP subnet mask of your Switch in dotted decimal
notation for example 255.255.255.0.
Gateway
Enter the IP address of the default outgoing gateway in dotted
decimal notation, for example 192.168.1.5.