Allied Telesis GS900/5E User Manual

Chapter 2: Installation

26

To unpack an AT-GS900/16 or an AT-GS900/24 switch, perform the 
following procedure:

1. Remove all components from the shipping package.

Store the packaging material in a safe location. You must use the 
original shipping material if you need to return the unit to Allied 
Telesis.

2. Place the switch on a level, secure surface.

3. Ensure the following hardware components are included in your switch 

package. If any item is missing or damaged, contact your Allied 
Telesis sales representative for assistance.

ˆ

One AT-GS900/16 or AT-GS900/24 Fanless Gigabit Ethernet 
switch

ˆ

Two rackmounting brackets

ˆ

Eight flathead Phillips screws

ˆ

Four #10-32 Phillips screws with a nylon washer

ˆ

Four self-adhesive rubber feet

ˆ

AC power cord

ˆ

Documentation CD