Allied Telesis X610-24SPS/X User Manual

x610 Series Layer 3 Gigabit Ethernet Switches Installation Guide

93

1. Remove the plastic protector from the connector at one end of the 

stacking cable. 

1244

Figure 63. Removing the Plastic Protector

2. Connect the cable to either Stack Port 1 or Stack Port 2 on the 

stacking module and secure by tightening the two captive 
thumbscrews.

3. Remove the plastic protector from the connector at the other end of the 

stacking cable and connect it to a Stack Port on the stacking module in 
the next switch of the stack. A stacking cable must crossover and 
connect to a different port on the next stacking module. Stack Port 1 on 
a module must connect to Stack Port 2 on the next module. 

Do not connect two stack Port 1 ports or stack Port 2 ports together.