Allied Telesis AT-9000/52 User Manual

Chapter 18: Setting LLDP and LLDP-MED

234



Med Notification— Indicates the switch sends LLDP-MED 
topology change notifications when devices are connected to or 
disconnected from the specified ports. By default, this field is not 
selected.

To display the LLDP port locations, do the following:

1. Select the Discovery & Monitoring tab.

The Discovery & Monitoring tab is displayed. See Figure 68 on page 
201.

2. From the Discovery & Monitoring tab, select LLDP.

The LLDP tab appears on the right.

3. From the LLDP tab, select Port Locations.

The LLDP Port Location page is displayed. See Figure 79 on page 
215.

The following fields are displayed.



Port Id— Indicates the port number. 



Civic Location ID— Use the pull-down menu to add civic location 
information to the port. The specified location entry must already 
exist.



Coordinate Location ID— Use the pull-down menu to add LLDP-
MED coordinate information to the port. The specified location 
entry must already exist.



ELIN Location ID— Use the pull-down menu to add ELIN location 
information to the port. The specified location entry must already 
exist.

To display the LLDP TLV settings, do the following:

1. Select the Discovery & Monitoring tab.

The Discovery & Monitoring tab is displayed. See Figure 68 on page 
201.

2. From the Discovery & Monitoring tab, select LLDP.

The LLDP tab is displayed.

3. From the LLDP tab, select TLV.

The LLDP TLV tab is displayed in Figure 81 on page 217.