Allied Telesis AT-9000/52 User Manual
AlliedWare Plus Version 2.1.2 Management Software Web Browser User’s Guide
51
Upgrading the Software
You can obtain the latest version of the AlliedWare Plus software from the
Allied Telesis web site. You must have access to a TFTP server from your
PC to upgrade the AlliedWare Plus software on your switch. Allied Telesis
does not include this application with the software. The upgrade process
takes approximately three minutes.
Allied Telesis web site. You must have access to a TFTP server from your
PC to upgrade the AlliedWare Plus software on your switch. Allied Telesis
does not include this application with the software. The upgrade process
takes approximately three minutes.
Upgrading the system software on the switch ends your current web
browser management session. To continue managing the switch, you
must login again.
browser management session. To continue managing the switch, you
must login again.
Note
All unsaved changes are discarded when you upgrade the software
on a switch. To save your changes, click SAVE.
on a switch. To save your changes, click SAVE.
To upgrade the AlliedWare Plus software, perform the following
procedure:
procedure:
1. Open your TFTP server software and provide it with the IP address of
the your PC.
2. Select the System Tab.
The System Settings Tab is displayed. See Figure 6 on page 33.
3. From the System Settings tab, select Dashboard.
The Dashboard Page is displayed. See Figure 4 on page 23.
4. Select System Upgrade at the bottom of the page.
The System Upgrade page is displayed. See Figure 18 on page 52.