Allied Telesis AT-PWR06 User Manual

Stack Installation Guide for AT-2552XS L2 Data Center Switch

57

Perform the following procedure to install a SFP+ transceiver:

1. Remove the dust plug from a SFP+ slot on the switch. Refer to Figure 

Figure 24. Removing the Dust Plug from a SFP+ Slot

2. Remove the module from its shipping container and store the 

packaging material in a safe location.

3. If you are installing the module in the top SFP+ slot, position the 

module with the handle facing up as shown in Figure 25. If you are 
installing the module in the bottom slot, position the module with the 
handle facing down.

Figure 25. Handle on SFP Transceiver

4. Verify that the SFP module handle is closed against the body of the 

module.

5. Slide the module into the slot until it snaps into place as shown in 

Handle