Allied Telesis fast ethernet 10/100 hubs User Manual
1
AT-FH812u and AT-FH824u Software
Introduction
The AT-FH812u and AT-FH824u hub (and the connected stack) is managed
through a direct console or modem connection to the AT-FH801u network
management agent module's serial port, using Telnet to access the hub over the
network, a standard browser to access the Agent Module's embedded web agent,
or with SNMP-based network management software. Once you connect a terminal
or PC to the serial port on the hub, you can perform the following tasks:
through a direct console or modem connection to the AT-FH801u network
management agent module's serial port, using Telnet to access the hub over the
network, a standard browser to access the Agent Module's embedded web agent,
or with SNMP-based network management software. Once you connect a terminal
or PC to the serial port on the hub, you can perform the following tasks:
❑
Enable/disable any port
❑
Set the communication mode for any port
❑
Configure SNMP parameters
❑
Select RMON options
❑
Configure port security
❑
Display system information or statistics
❑
Download system firmware
❑
Restart the system