Allied Telesis fast ethernet 10/100 hubs User Manuals

Table of Contents

• user’s GUIDE

  1
  • AT-FH812u AT-FH824u

    1
  • Fast Ethernet 10/100 Hubs

    1
• Table of Contents

  3
  • AT-FH812u and AT-FH824u Software 1

    3
  • Introduction 1

    3
  • Required Connections for System Configuration 2

    3
  • Connecting a VT100 Terminal 2

    3
  • Connectinga Modem 2

    3
  • Making a Telnet Connection 3

    3
  • Connecting for an In-Band Network 3

    3
  • Configuring YourSystem with the Console Interface 4

    3
  • Using the System Configuration Program 5

    3
  • Displaying System Information 7

    3
  • Resetting the System 8

    3
  • Logging Off the System 8

    3
  • Performing Basic Configuration 8

    3
  • Changingthe Network Configuration 9

    3
  • Assigning SNMP Parameters 10

    3
  • SNMP Communities 11

    3
  • IP Trap Managers 12

    3
  • Hub Configuration 13

    3
  • Hub Selection Menu 13

    3
  • Hub Configuration Menu 14

    3
  • Configuring Port Parameters 16

    3
  • Defining Port Backups 18

    3
  • Configuring Port Security 19

    3
  • RMON Configuration 20

    3
  • Downloading System Software 21

    3
  • Using the Serial Port to Downloadvia Out-of-Band 22

    3
  • Changing System Passwords 23

    3
  • Configuring the Out-of-Band Console 23

    3
  • Displaying Statistics 23

    3
  • Displaying Repeater Statistics 24

    3
  • Displaying Hub Statistics 25

    3
  • Displaying Port Statistics 26

    3
  • Troubleshooting 28

    3
  • Network Management Access 28

    3
  • Pin Assignments for Serial Port Connections 28

    3
  • AT-FH812u and AT-FH824u Software

    5
  • Introduction

    5
• Required Connections for System Configuration

  6
• Connecting a VT100 Terminal

  6
• Connectinga Modem

  6
  • Configure the Hub Site

    6
  • Configure the Remote Site.

    6
• Making a Telnet Connection

  7
  • Use the Network Configuration menu to specify the maximum number of simultaneous Telnet connectio...

    7
• Connecting for an In-Band Network

  7
  • The on-board program only provides access to basic configuration functions. To access the full ra...

    7
• Configuring YourSystem with the Console Interface

  8
  • V0.09 06-08-98 (C) Copyright Allied Telesyn International, Corp.

    8
  • A user is allowed three attempts to enter the correct password; on the third failed attempt the c...

    8
• Using the System Configuration Program

  9
  • Options for the currently selected item are displayed in the highlighted area at the bottom of th...

    9
    • Table 1 System Configuration Commands

      10
• Displaying System Information

  11
  • Pressing the <APPLY> button makes all changes permanent by writing them to EEPROM. Pressing <OK> ...

    11
    • Table 2 System Information Parameters

      11
• Resetting the System

  12
• Logging Off the System

  12
• Performing Basic Configuration

  12
• Changingthe Network Configuration

  13
  • Table 3 Network Configuration Parameters

    13
• Assigning SNMP Parameters

  14
  • Table 4 SNMP Parameters

    14
• SNMP Communities

  15
  • Table 5 SNMP Communities Parameters

    15
• IP Trap Managers

  16
  • IP Trap Managers

    16
    • Table 6 IP Trap Manager Parameters

      16
• Hub Configuration

  17
• Hub Selection Menu

  17
  • Hub Configuration: Hub Selection Menu

    17
    • Table 7 Hub Selection Parameters

      17
• Hub Configuration Menu

  18
  • Hub Configuration

    18
    • Table 8 Hub Configuration Parameters

      19
• Configuring Port Parameters

  20
  • If a port is disabled by an intrusion action, you must disable it manually in the Administration ...

    20
    • Table 9 Port Administration Status Control Parameters

      21
• Defining Port Backups

  22
  • Table 10 Backup Link Control Parameters

    22
• Configuring Port Security

  23
  • Table 11 Definition of Port Security Control Parameters

    23
• RMON Configuration

  24
  • Table 12 RMON Configuration Parameters

    24
  • To use the functions provided by RMON, you must access the hub's agent with an SNMP management pr...

    24
• Downloading System Software

  25
  • Using TFTP Protocol to Download over the Network

    25
    • Table 13 TFTP Download Parameters Defined

      25
• Using the Serial Port to Downloadvia Out-of-Band

  26
  • XMODEM Download

    26
  • Download Mode : Upgrade DRAM & Reboot

    26
  • Start XMODEM Download

    26
  • Use ESC for help. Use arrow keys to move.

    26
  • Use TAB or Cursor keys to move, <Space> to select.

    26
    • Table 14 Xmodem Download Parameters Defined

      26
• Changing System Passwords

  27
  • Table 15 System Password Parameters

    27
• Configuring the Out-of-Band Console

  27
  • Table 16 Out-of-Band Console Parameters

    27
• Displaying Statistics

  27
• Displaying Repeater Statistics

  28
  • Table 17 Repeater Statistics Parameters

    28
• Displaying Hub Statistics

  29
  • Hub Statistics

    29
    • Table 18 Hub Statistics Parameters

      29
• Displaying Port Statistics

  30
  • Refresh Statisttics Auto-Refresh Statistics

    30
  • Reset Counter

    30
    • Table 19 Port Statistics

      31
• Troubleshooting

  32
• Network Management Access

  32
• Pin Assignments for Serial Port Connections

  32
  • DB9 Serial Port Pin Description

    32