Intermec PF2i User Manual

Put back the cover over the electronics compartment. 
Route the cable from the display unit above the ribbon motor.

Connect the cable to connector J50 at the upper front corner of the 

CPU board. 
Connect the power cord and switch on the power.
Enter Setup Mode and print the test label “Hardware Info” in 

Fingerprint or “HW” in IPL to see if the printer detects the EasyLAN 

Wireless interface board. For information on how to enter the Setup 

Mode and print test labels, refer to the printer’s user's guide.

Antenna

EasyLAN adapter 

board

Light guide

Cable clips

#T20 Torx screw 

and spacer

Antenna

cable

Cable tie