Elmo Tuba Digital Servo User Manual
3.3.2
Mounting on a DIN Rail
At the top rear of the Tuba, a horizontal groove lets you quickly and easily snap the drive
onto a DIN rail in your work area.
onto a DIN rail in your work area.
To mount the Tuba on a DIN rail:
2. Be sure that the vertical mounting strip (with the hole at the top) is pressed down fully
2. Be sure that the vertical mounting strip (with the hole at the top) is pressed down fully
and does not protrude from the top of the instrument.
Figure 3-2: Mounting Strip Pressed Down
Tilt the Tuba back towards the top part of the DIN rail.
Figure 3-3: Attaching Top Part of Mounting Groove to DIN Rail
Tuba Installation Guide
Installation
MAN-TUBIG (Ver. 1.3)
3-6