Gateway 7210 User Manual
76
Replacing and Adding Internal Devices
6
Pull the backplane out to the side of the chassis, then toward the back
of the system to remove it from the retention hooks.
of the system to remove it from the retention hooks.
7
Lift the backplane out of the chassis.
8
Set any jumpers on the new backplane that are required for your SCSI
configuration. (See “Hot-plug backplane” on page 11 for instructions.)
configuration. (See “Hot-plug backplane” on page 11 for instructions.)
8505945.book Page 76 Thursday, March 9, 2000 2:13 PM