Fujitsu V3.1.0 User Manual

-

Deleting VLAN IDs from LAN switch ports

Use the following procedure to delete VLAN IDs:

1.

In the ROR console server resource tree, right-click the target LAN switch blade and select [Modify]-[Network Settings] from
the popup menu.

The [VLAN Settings] dialog is displayed.

2.

To use this feature, the following settings must first be defined:

VLAN

Select "Change" and select the VLAN ID that has been changed.

Physical Port, Link Aggregation

Select [None] from the VLAN type of the port number to delete VLANs or link aggregation group name.

3.

Click <OK>.

The VLAN ID is deleted.

Newly added LAN switches can be discovered by re-executing LAN switch discovery.
For details on LAN switch discovery, refer to "

This section explains how to change VM management software settings.

The following settings can be changed.

-

Location

-

IP address

-

User ID

-

Password

Here the method for changing settings registered with Resource Orchestrator is explained.

Complete re-configuration within the VM management software admin console before performing this procedure.

Use the following procedure to change VM management software settings:

1.

In the ROR console management software tree, right-click the target management software, and select [Modify]-[Registration
Settings] from the popup menu.

The [Modify Management Software(

name

) Settings] dialog is displayed.

The name of the selected VM management software is displayed in 

name

.

2.

Enter the following items:

Location

Select the location of the VM management software registration to change.

-

If VM management software is installed on the admin server

Select [Admin Server].

-

In other cases

Select [Other Server].

IP address

If [Other Server] was selected, enter the IP address of the server on which VM management software is installed.

- 77 -