Fujitsu C122-E119EN User Manual

(2) Select a rack.

For a rack to be fixed in place, select one that comes without a stabilizer. See "(3) Select a fixed construction"

below.

For a rack not to be fixed in place, be sure to select one that comes with a stabilizer. See 

.

 

For a rack not to be fixed in place, be sure to select one that comes with a stabilizer, regardless of whether the

building or flooring has earthquake-resistant (seismic) features. Use the stabilizer to prevent the rack from toppling

during maintenance of any device mounted in the rack.
 

(3) Select a fixed construction.

The two types of construction for fixing the rack in place are as follows:

- Construction using an optional earthquake-resistance kit

- Construction using leveling feet

After considering conditions such as the installation floor, select either construction type appropriate to the

conditions.

To use an earthquake-resistance kit to fix the rack in place, see "(4) Arrange for an optional earthquake-resistance

kit" below.

.

 
Note

Unless it is fixed to the floor, a rack that comes without a stabilizer cannot be used. The rack must be fixed in place

to prevent it from toppling, such as during maintenance of a device mounted in the rack.
 
(4) Arrange for an optional earthquake-resistance kit.

To use an earthquake-resistance kit, arrange for the optional earthquake-resistance kit appropriate to the respective

base or expansion rack.

- For Model 1740 base rack: 19R-17ST1

- For Model 1740 expansion rack: 19R-17ST2

- For Model 1640/1624 base rack: 19R-16ST1

- For Model 1640/1624 expansion rack: 19R-16ST2

 

PRIMEQUEST 1000 Series Hardware Installation Manual
APPENDIX A Racks

50

C122-H004-07EN