Fujitsu N800 User Manual

U41243-J-Z156-1-76

 69

Configuration software and utilities

Before you update BIOS, record the current BIOS settings, obtain the utility, and 
make a copy of the current BIOS.

Ê

Start the server and press 

[F2]

 when the following message is displayed on 

the screen:

Press <F2> key if you want to run SETUP

Ê

Write down the current settings from the 

 program.

I

Do not skip set 2. You will need these settings to configure your 
computer at the end of the procedure.

Ê

Use a DOS or Windows 95 system to create the floppy disk.

Ê

Insert the disk in drive A.

Ê

At the C:\ prompt, enter the following for an unformated floppy disk:

format a:/s

or the following for a formated floppy disk:

sys a:

Ê

Press 

Ú

.

Ê

Copy the flash files generated as described in section “BIOS and firmware 
update” on page 70 to your bootable floppy disks.