Fujitsu N800 User Manual

U41243-J-Z156-1-76

 71

Configuration software and utilities

Although it is unlikely that the BIOS update process will be interrupted, BIOS 
could be damaged if an interruption does occur. In this case, you must recover 
BIOS.

I

Because of the small amount of code available in the non-erasable boot 
block, there is no graphics support. Therefore, you will not see anything 
on the screen during this procedure. You can monitor the procedure by 
listening to the beeps and looking at the LED on the floppy disk drive. 

The procedure for recovering BIOS is described in detail in the section 
“Changing the switch settings” on page 39. After completing the 
procedure, leave the update disk in drive A and turn on the server. Then 
continue with the procedure for updating BIOS.

You can use the BIOS update utility to change the language used for BIOS 
display. Use a bootable floppy disk containing the flash utility and language files.

Ê

Boot the server with the bootable floppy disk in drive A. The user interface 
for the BIOS update utility is displayed on the screen.

Ê

Select 

 and then 

. Then 

press 

Ú

.

Ê

Use the arrow keys to select the appropriate lng file. Press 

Ú

.

Ê

When asked to confirm that you want to overwrite the old language in 
memory with the new language, select 

 and press 

Ú

.

Ê

When the message 

 is displayed, remove the floppy disk 

from drive A and press 

Ú

.

The computer will reboot and the changes will take effect.