Fujitsu N800 User Manual

72

 

 U41243-J-Z156-1-76

Configuration software and utilities

After configuration the system, you must install graphic drivers in order to fully 
utilize the functions of the onboard CL-GD5480 super VGA graphic controller. 

Ê

The CD-ROM containing the configuration software also contains the 
graphic drivers for use under DOS or Windows NT. Read the information on 
installing these drivers in the 

 file on the CD-ROM.

Ê

You will find information on other operating systems in your operating 
system instructions for installing device drivers.

The QLogic SCSI utility detects the SCSI host adapter on the system board. You 
can use this utility to

–

change default values

–

check and/or change SCSI device settings that may conflict with those of 
other servers.

Ê

To start the program, press 

[Alt]

+

[Q]

 when the following message is 

displayed on the screen:

Press Alt+Q to start QLogic Configuration Utility ...

The PCI hot-plug software 

 is included on the ServerStart CD 

(see also the section “Boards in hot-plug PCI slot” on page 99).

Ê

Place the CD in the CD drive and start the 

 program.

The setup program copies the PCI hot-plug utility and the corresponding drivers 
to the hard disk and makes the necessary registry entries. A new symbol is 
added to the Control Panel which you can use to run the PCI hot-plug utility.