Nortel Networks 555-4001-135 User Manual
218 Upgrades
553-3001-358/555-4001-135 Standard 02.00 July 2006
Use a BUI administration window for the upgrade process, which
supports both options (see Figure 94). The CLI can also be used.
Follow the steps in Procedure 45 to upgrade the ICB firmware version.
supports both options (see Figure 94). The CLI can also be used.
Follow the steps in Procedure 45 to upgrade the ICB firmware version.
Procedure 45
Upgrade the ICB firmware version
1
Log into the BUI.
2
Click Upgrade the Firmware Version in the Dashboard. The Firmware
Upgrade window opens. See Figure 94 for a depiction.
Upgrade window opens. See Figure 94 for a depiction.
Figure 94
ICB Dashboard – FIrmware Upgrade window
3
Select the source of the new firmware version. If the source is an FTP server,
specify the IP address, path, login user name, and password.
specify the IP address, path, login user name, and password.
This procedure is now complete
4
Click Upgrade & Restart.
After upgrading the firmware, you must publish the new upgraded ICB
form that comes with the firmware. See Procedure 34, “Upgrading the
ICB form in the Organizational Forms Library,” on page -173.
form that comes with the firmware. See Procedure 34, “Upgrading the
ICB form in the Organizational Forms Library,” on page -173.
The top-right corner of the Firmware Upgrade window shows the
current hardware and firmware versions. The firmware version takes
the form of “4.xx”, where 4 is the ICB release and xx is the firmware
version number.
current hardware and firmware versions. The firmware version takes
the form of “4.xx”, where 4 is the ICB release and xx is the firmware
version number.
The first step is to specify the upgrade source by clicking on one of the
radio buttons. Depending on the source selected, the following
procedures describe how to perform the firmware upgrade.
radio buttons. Depending on the source selected, the following
procedures describe how to perform the firmware upgrade.