Nortel Networks 555-4001-135 User Manual

 

Access the ICB Installation Wizard: Step 1 – Basic Card Settings window (see 

). In the “Type” field, select the 

radio button “Dual Card – Primary.”

Click the Submit & Continue button.

If 10 DN pairs are configured, the system deletes one automatically. The ICB 
first attempts to delete a DN pair that has no conferences scheduled against 
it. If no such DN pair is found, the ICB deletes the DN pair with the least 
number of conferences using it. All associated conferences are deleted.

Note:  A DN pair used by a permanent conference is not deleted.

If a DN pair is deleted in direct-access dialing mode, a pop-up message 
appears. Note the deleted DN pair, as it can be removed from the Meridian 
switch configuration.

The system displays Step 2 of the Installation Wizard (see 

). If the automatic change, as described above, took 

place, this is reflected in the DN table. If the direct access dialing mode is 
used, only nine DNs appear.

Click the Submit & Continue button.

The system displays Step 4 of the Installation Wizard (see

 

If a DN pair was automatically deleted as described above, it appears in the 
fields “Conference access number” and “Chairperson number in primary 
card.” You can change these numbers; they must be configured in the 
Meridian switch as well.

Fill in all the fields as described in the installation instructions, and click the 
Finish button.

Logout of this card and proceed with the Meridian switch configuration 

change (see Procedure 51

).

 

If a DN pair was deleted from the secondary or primary card, delete it from 
the switch datafill.

Configure the DNs defined in the Installation Wizard Step 4 window of the 
primary ICB. Define them as described in the dual-card ICB installation 
instructions (for the Meridian 1 or CS 1000 see 

; for the CS 2100 or Meridian SL-100 see 

).