Nortel Networks NN43001-314 User Manual
238
MG 1000B platform hardware installation
Figure 86
Signaling Server indicators and power switch
Signaling Server indicators and power switch
The Signaling Server LED indicators show the following:
•
Power – green LED on, power on; LED off, power off.
•
Status – red LED off, CPU running; LED on, CPU halted.
•
Drive – green LED flashing, Hard Drive or CD ROM Drive
active.
active.
•
Link – green LED, Ethernet port active.
•
100Mbps – green LED on, Ethernet port running at 100Mbps;
LED off, Ethernet port running at 10Mbps.
LED off, Ethernet port running at 10Mbps.
When the power is turned off on a Signaling Server, the two Link
LEDs for Port 0 and Port 1 continue to flash. Depress the Power
button for approximately seven seconds to completely turn the
power off.
LEDs for Port 0 and Port 1 continue to flash. Depress the Power
button for approximately seven seconds to completely turn the
power off.
6
For additional operating information, refer to the Signaling Server
Product Guide on the Resource CD-ROM shipped with the Signaling
Server.
Product Guide on the Resource CD-ROM shipped with the Signaling
Server.
—End—
To install the Signaling Server software, see
.
Nortel Communication Server 1000
Branch Office Installation and Commissioning
NN43001-314
01.02
Standard
Release 5.0
20 June 2007
Copyright © 2007, Nortel Networks
.