Lucent Technologies 108596560 User Manual

Issue 6

December 1999

Hospitality Operations 

10

Guest Operations 

1. Pick up the handset of your telephone and press the wakeup button, or enter 

the Automatic Wakeup Call feature access code _____.

■

Listen to the wakeup instructions. You will hear “You have reached 
the automatic wakeup service. Your current request for a wake-up 
call is _____. Press the 

2

 button to change; press the 

3

 button to 

delete.”

2. If you want to change the wakeup time that you entered earlier, press the 

2

 

button.

■

You will now go through the original procedure for entering a 
wakeup time again. Your new time will replace the old time.

3. If you want to delete your wakeup call completely, press the 

3

 button.

■

You will hear the message “Thank you. Your request has been 
canceled.” You can hang up.

4. Hang up the telephone.

Provide the following procedures to your guests to activate and deactivate wakeup 
calls if the Wakeup Activation via Tones feature is activated. The Dual Wakeup 
feature is required if you want to allow your guests to have two wakeup calls. 
Guests cannot activate a Daily Wakeup or a VIP Wakeup.

Access to the Automatic Wakeup feature may be from a button on the guest 
telephone or by using a feature access code.

1. Pick up the handset of your telephone and press the wakeup button, or enter 

the Automatic Wakeup Call feature access code _____.

■

You will hear recall dial tone (3 short tones, followed by dial tone).

2. Using the dial keypad, enter the time that you wish to receive a wakeup 

call. The time must be entered using the 24-hour clock format (for 
example, 0900 is 9 a.m. and 2230 is 10:30 p.m.).

■

You will hear confirmation tone (3 short tones, followed by silence).

■

If you make a mistake, you may hear intercept tone (siren tone). 
Hang up and start over.

■

If you hear reorder tone (fast busy), the switch cannot accept your 
request at this time. Try again later, or call the front desk.

3. Hang up the telephone.