Lucent Technologies 108596560 User Manual

Issue 6

December 1999

Hospitality Operations 

13

Guest Operations 

2. If you want to change the time your Do Not Disturb period ends, press the 

2

 

button.

■

You will now go through the original procedure for entering the 
time. Your new time will replace the old time.

3. If you want to cancel Do Not Disturb completely, press the 

3

 button.

■

You will hear a message saying “Thank you. Your request has been 
canceled.” You can hang up.

Press the Do Not Disturb button.

■

The lamp next to the Do Not Disturb button lights. Do Not Disturb 
is now activated.

When the Do Not Disturb lamp is on, press the Do Not Disturb button.

■

The lamp next to the Do Not Disturb button goes off. Do Not 
Disturb is now deactivated.

In an emergency situation, you can send the attendant an urgent call for help. This 
call does not automatically place a call to an emergency service agent; a separate 
call is required. The attendant will receive both audible and visible signals that 
indicate the emergency call. There are two ways to place an emergency call to the 
attendant:

■

Pick up the handset of your telephone and enter the Emergency Access to 
Attendant feature access code _____. The switch then sends an emergency 
signal to the attendant.

■

If you cannot press the code, take the handset off the telephone. After being 
off-hook for the administered time interval, the switch automatically sends 
an emergency signal to the attendant.

This feature has administrable parameters that are documented in DEFINITY 
Enterprise Communications Server Administrator’s Guide.