Lucent Technologies 108596560 User Manual

Issue 6

December 1999

Hospitality Operations 

68

Housekeeping Staff Operations 

3. As you reach different steps in cleaning the room, update the status by 

repeating steps 1 and 2.

If you were told to use a designated telephone (any telephone other than a guest 
room telephone) to report your status, perform the following:

1. Using the designated telephone, pick up the handset and enter the status 

feature access code that corresponds with the room’s current status. For 
example, if you have finished cleaning a room, press the 

2

 button, then 

press the 

3

 button.

2. After you hear a dial tone, enter the room number.

3. If you hear another dial tone, enter in your identification code (a 1- 

to 6-digit number). Once the code has been accepted, you will hear a 
confirmation tone (a 3-burst tone). Hang up the handset and continue with 
your work.

You should wait until you hear a confirmation tone to ensure 
that the update was accepted by the system. It may take up to 
40 seconds to hear the confirmation tone.

4. Repeat steps 1 through 3 as necessary to report new room status 

information.

The following table contains your specific status feature access codes and their 
meanings. If any of the codes are not identified, contact your supervisor. Note that 
you have only 4 status codes when using a designated telephone.

 

 

 

 

 

 

 

 

 

 

 

 

 

N/A

 

 

N/A