Manualsbrain.com
  1. Manuals
  2. Brands
  3. Polycom
  4. 1725-36031-001
  5. User Manual

Polycom 1725-36031-001 User Manual

Download
Page of 51
SpectraLink 8000 SVP Server: Administration Guide for Mitel and Cisco 
PN: 1725-36031-001_H.doc 
20 
Locate the SVP Server 
The SVP Server measures approximately 4 x 12.5 x 7 inches, and 
weighs about five pounds. The unit can be wall- mounted, vertically 
or horizontally, over ¾" plywood. The SVP Server can also be rack- 
mounted using a rack- mount kit (sold separately). 
Locate the SVP Server in a space with: 
• 
Sufficient backboard mounting space (for wall mount) and 
proximity to the LAN access device (switched Ethernet hub) and 
power source.  
• 
Easy access to the front panel, which is used for cabling.  
• 
A maximum distance of 325 feet (100 meters) from the Ethernet 
switch. 
Install the SVP Server 
The SVP Server may be mounted on a rack or to a wall. 
Mount the SVP Server on a rack 
The rack-mount kit is designed for mounting equipment in a standard 
19-inch rack and should contain the following equipment:  
†  Mounting plates
 – two for each SVP Server to be mounted. 
†  Screws
 – four rack-mount screws for each SVP Server to be 
mounted.  
To rack-mount the SVP Server: 
1.  Remove the corner screws from the SVP Server. 
2.  Screw the U-shaped end (round screw holes) of the two mounting 
plates to the SVP Server. 
3.  Screw the other end of the two mounting plates (oblong screw 
holes) to the rack. 
4.  Repeat steps 1-3 for each additional SVP Server. The mounting 
plate is designed to provide the correct minimum spacing 
between units. When mounting multiple units, stack the units in 
the rack as closely as possible.