Polycom 1725-36031-001 User Manual

SpectraLink 8000 SVP Server: Administration Guide for Mitel and Cisco 

PN: 1725-36031-001_H.doc 

22 

Connect SVP Server to LAN 

Using a Cat. 5 cable, connect the 

NETWORK

 port on the SVP Server to 

the connecting port on the Ethernet switch. 

Connect power 

1.  Once the units have been properly grounded, connect the power 

plug from the AC adapter to the jack labeled 

PWR

 on the SVP 

Server.  

 

Use only the provided Class II AC Adapter with output 24V DC, 1A. 

2.  Plug the AC adapter into an 110VAC outlet to apply power to the 

SVP Server. 

3.  Verify that leakage current ("touch" current) is below 250 μA rms 

on exposed metal surfaces. 

4.  If leakage is excessive, power off the system and re-verify ground 

path continuity. 

5.  The system will cycle through diagnostic testing and the LEDs 

will blink for about one minute. When the system is ready for use: 

— 

The 

ERROR

 LED should be off. 

—  Status 1

 should be blinking.