Polycom 1725-36031-001 User Manual
SpectraLink 8000 SVP Server: Administration Guide for Mitel and Cisco
PN: 1725-36031-001_H.doc
26
Note the navigation options at the bottom of the screen. Press Enter to
change a value, ESC to exit the screen, and the arrow keys to move
the cursor.
change a value, ESC to exit the screen, and the arrow keys to move
the cursor.
SendAll
In an IP system with multiple SVP Servers, the
SendAll
option is
provided to speed configuration and to ensure identical settings. The
S=SendAll
option allows you to send that configuration parameter to
every SVP Server on the LAN.
SendAll
can only be used after the IP
address is established on EACH SVP Server via the serial connection.
If you anticipate identical settings across the LAN, set just the IP
address and custom hostname (if desired) for each SVP Server using
the initial serial connection. Then connect via the LAN and use
If you anticipate identical settings across the LAN, set just the IP
address and custom hostname (if desired) for each SVP Server using
the initial serial connection. Then connect via the LAN and use
SendAll
to set identical configuration options for all SVP Servers.
If
If
SendAll
is to be utilized in your system, all passwords must be
identical. DO NOT CHANGE THE PASSWORD AT THE INITIAL
CONFIGURATION IF THE SendAll OPTION IS DESIRED. Use the
default password and change it globally if desired after a LAN
connection is established for all SVP Servers.
If independent administration of each SVP Server is desired, the
passwords may be set at initial configuration.
CONFIGURATION IF THE SendAll OPTION IS DESIRED. Use the
default password and change it globally if desired after a LAN
connection is established for all SVP Servers.
If independent administration of each SVP Server is desired, the
passwords may be set at initial configuration.