Polycom 1725-36031-001 User Manual

SpectraLink 8000 SVP Server: Administration Guide for Mitel and Cisco 

PN: 1725-36031-001_H.doc 

28 

•  IP Address

: The IP address of a network TFTP server that will be 

used to transfer software updates to the SVP Server. 

DNS server and DNS domain 

These settings are used to configure Domain Name services. Consult 
your system administrator for the correct settings. These can also be 
set to 

DHCP

. This will cause the DHCP client in the SVP Server to 

attempt to automatically get the correct setting from the DHCP server. 
The DHCP setting is only valid when the IP address is also acquired 
using DHCP. 

WINS servers 

These setting are used for Windows Name Services. Consult your 
system administrator for the correct settings. These can also be set to 

DHCP

. This will cause the DHCP client in the SVP Server to attempt to 

automatically get the correct setting from the DHCP server. The 
DHCP setting is only valid when the IP address is also acquired using 
DHCP. 

 

When the name services are set up correctly, the SVP Server can 
translate hostnames to IP addresses. Using telnet, it is also 
possible to access the SVP Server using its hostname instead of 
the IP address. 

Workgroup 

As set in WINS. 

Syslog Server 

Logging can be set to 

Syslog

 or 

NONE

. If Syslog is set, a message is sent 

to the syslog server when an alarm is triggered. 

Disable Telnet Service 

Prevents Telnet access into the SVP Server. Reset the SVP Server for 
the change to take effect. Upon reset the Telnet protocol server is not 
started. 
The SVP Server must be reset in order to set the configuration options. 
If the SVP Server is in 

Maintenance Lock

, you must manually reset it by