Polycom DOC2562A User Manual

®

Follow these rules to ensure general safety:
•

Keep the area around the Polycom RMX

®

 1500 unit clean and free 

of clutter and well ventilated.

•

Decide on a suitable location for the equipment rack that will hold 

the RMX, ensuring that it is near a grounded power outlet.

•

Ensure that the leveling jacks on the bottom of the rack are fully 

extended to the floor with the full weight of the rack resting on 

them. Always make sure the rack is stable before extending a 

component from the rack.

•

In a single rack installation, attach stabilizers to the rack. In 

multiple rack installations, the racks should be coupled together.

•

Use a regulating uninterruptable power supply (UPS) to protect the 

RMX from power surges and voltage spikes, and to keep it 

operating in the event of a power failure.

•

Allow the power supply unit to cool before touching it.

•

Always keep the rack’s trays and board’s closed when not 

servicing, to maintain proper cooling.

Obtain the following information from your network administrator:
•

IP addresses, Subnet Mask and Default Gateway IP address 

(optional) for the RMX control unit and RMX Shelf Management.

•

IP addresses for the RMX Signaling Host and Media cards.

•

Gatekeeper IP address.

•

SIP server IP address, if applicable.