Honeywell 1450g User Manual

Scan the bar codes below to change the message length.  Refer to 

 (page 7-1) for additional 

information.  Minimum and Maximum lengths = 1-7089.   Minimum Default = 1, Maximum Default = 7089.

This function allows the scanner to append the data from several QR Code bar codes together before transmitting them to 
the host computer.  When the scanner encounters an QR Code bar code with the append trigger character(s), it buffers the 
number of QR Code bar codes determined by information encoded in those bar codes.  Once the proper number of codes 

is reached, the data is output in the order specified in the bar codes.  Default = On.

QR Code pages define the mapping of character codes to characters.  If the data received does not display with the proper 
characters, it may be because the bar code being scanned was created using a  code page that is different from the one the 
host program is expecting.  If this is the case, scan the bar code below, select the code page with which the bar codes were 
created (see 

 on page A-7), and scan the value and the Save bar code from 

the 

 on the inside the back cover of this manual.  The data characters should then appear properly.