Honeywell 1450g User Manual

Repairs and/or upgrades are not to be performed on this product.  These services are to be performed only by an authorized 
service center (see 

Your device provides reliable and efficient operation with a minimum of care.  Although specific maintenance is not required, the 
following periodic checks ensure dependable operation:

Reading performance may degrade if the scanner’s window is not clean.  If the window is visibly dirty, or if the scanner isn’t 
operating well, clean the window with a soft cloth or lens tissue dampened with water (or a mild detergent- water solution).  
If a detergent solution is used, rinse with a clean lens tissue dampened with water only.

The scanner and base’s housing may also be cleaned the same way.

Inspect the interface cable and connector for wear or other signs of damage.  A badly worn cable or damaged connector 
may interfere with scanner operation.  Contact your distributor for information about cable replacement.  Cable replacement 
instructions are on 

.

The standard interface cable is attached to the scanner with an 10-pin modular connector.  When properly seated, the connec-
tor is held in the scanner’s handle by a flexible retention tab.  The interface cable is designed to be field replaceable.

•

Order replacement cables from Honeywell or from an authorized distributor.

•

When ordering a replacement cable, specify the cable part number of the original interface cable.