Honeywell 1450g User Manual
2 - 6
Honeywell Bioptic Aux Port Configuration
Scan the following Plug and Play code to program the scanner for a Honeywell bioptic scanner auxiliary port configuration. This
bar code sets the baud rate to 38400 bps and the data format to 8 data bits, no parity, 1 stop bit.
bar code sets the baud rate to 38400 bps and the data format to 8 data bits, no parity, 1 stop bit.
Datalogic™ Magellan
©
Bioptic Aux Port Configuration
Scan the following Plug and Play code to program the scanner for a Datalogic Magellan bioptic scanner auxiliary port configura-
tion. This bar code sets the baud rate to 9600 bps and the data format to 8 data bits, no parity, 1 stop bit.
tion. This bar code sets the baud rate to 9600 bps and the data format to 8 data bits, no parity, 1 stop bit.
NCR Bioptic Aux Port Configuration
Scan the following Plug and Play code to program the scanner for an NCR bioptic scanner auxiliary port configuration. The fol-
lowing prefixes are programmed for each symbology:
lowing prefixes are programmed for each symbology:
Wincor Nixdorf Terminal Default Settings
Scan the following Plug and Play code to program the scanner for a Wincor Nixdorf terminal. This bar code sets the baud rate
to 9600 bps and the data format to 8 data bits, no parity, 1 stop bit.
to 9600 bps and the data format to 8 data bits, no parity, 1 stop bit.
Symbology
Prefix
Symbology
Prefix
UPC-A
A
Interleaved 2 of 5
b
UPC-E
E0
Code 128
f
GS1 DataBar
Omnidirecitonal
Omnidirecitonal
r
EAN-8
FF
GS1 DataBar
Expanded
Expanded
r
EAN-13
F
Codabar
N
Code 39
a
Code 32
Pharmaceutical
(PARAF)
Pharmaceutical
(PARAF)
a
Honeywell Bioptic Settings
Datalogic Magellan Bioptic Settings
NCR Bioptic Settings
Wincor Nixdorf Terminal Settings