OmniTek 2.3 User Manual
Page 10
OmniTek XR User Guide, Software Release 2.3
The usual selection of the sync for a waveform monitor is Serial lock (as selected by
Auto detect).
Auto detect).
For further details of video setup, please refer to page 21 of this guide.
Windows Layout
Normal mode generally opens with the choice of windows and toolbars that was last used
in that display mode. This selection of windows is not affected by any Full Screen layouts
that have been used.
in that display mode. This selection of windows is not affected by any Full Screen layouts
that have been used.
If the selection of windows shown is not as you want, you can change which windows are
open, and their positions, using the usual click and drag techniques. A full list of the
available windows is on the ‘Window’ menu, although most windows have icon shortcuts.
You can also configure the contents of the windows to suit your requirements, even to the
extent of setting the colours used for the different traces (through Look & Feel options
associated with the individual windows). Particular layouts can also be saved for use later
by using the ‘Window layout’ options included in the File menu (see page 15).
open, and their positions, using the usual click and drag techniques. A full list of the
available windows is on the ‘Window’ menu, although most windows have icon shortcuts.
You can also configure the contents of the windows to suit your requirements, even to the
extent of setting the colours used for the different traces (through Look & Feel options
associated with the individual windows). Particular layouts can also be saved for use later
by using the ‘Window layout’ options included in the File menu (see page 15).
Particular combinations of settings can be saved as system configurations that you can
subsequently call up again by taking Load system configuration from the
‘Configuration’ menu. Alternatively, you can opt to have the system prompt for the system
configuration to use when you run OmniTek XR by taking the option to prompt at start-up
for the system configuration to load from the ‘File’ Preferences menu (see page 14).
subsequently call up again by taking Load system configuration from the
‘Configuration’ menu. Alternatively, you can opt to have the system prompt for the system
configuration to use when you run OmniTek XR by taking the option to prompt at start-up
for the system configuration to load from the ‘File’ Preferences menu (see page 14).
Note:
No system configuration files are included with the original installation.
Status Bar
At the bottom of the main application window, there is a status bar.
The items displayed are:
Currently selected
video format
video format
Note that this may not reflect the standard of the video
source connected to the unit.
source connected to the unit.
Status of the analog
reference
reference
Serial input
}
}
}
}
}
}
}
These items are colour coded to indicate status.
Green
Green
indicates OK. Orange/Brown means the item listed
is incorrect in some fashion, but is not being used.
Red
Red
means it is incorrect and being used.
Page n
‘Work Surface’ buttons (see the description of the
‘Pages’ option on page 15).
‘Pages’ option on page 15).