OmniTek 2.3 User Manual
Page 8
OmniTek XR User Guide, Software Release 2.3
Quick Start Guide
This section provides a basic guide to starting work with the OmniTek XR application.
On starting, a message first appears enquiring whether you wish to use the program’s
Advanced Audio or the Motion-Capture facilities. Then, by default, since all OmniTek
systems have the ability to send status messages over SNMP, the system attempts to
connect to an SNMP service running on the PC. If such a service cannot be found, you
will see the following message.
Advanced Audio or the Motion-Capture facilities. Then, by default, since all OmniTek
systems have the ability to send status messages over SNMP, the system attempts to
connect to an SNMP service running on the PC. If such a service cannot be found, you
will see the following message.
If you do not need the SNMP functionality, this message can be safely ignored and, if you
wish, you can select the option not to show this message again.
wish, you can select the option not to show this message again.
If you need the SNMP service, this needs to be separately installed. The SNMP service is
a Microsoft operating system extension, and can be installed from the master Windows
installation disk created by Microsoft. OmniTek have a document on the support section
of our website at
a Microsoft operating system extension, and can be installed from the master Windows
installation disk created by Microsoft. OmniTek have a document on the support section
of our website at
www.omnitek.tv
explaining how this service may be installed.
Further details on the use of SNMP with OmniTek XR may be found in the section on
Logging, which starts on page 118.
Logging, which starts on page 118.
With the OmniTek application running, you will see a window similar to that illustrated
below, depending on what modules and options are present on your system.
below, depending on what modules and options are present on your system.