Panasonic WJ-GXE500E Operating Guide
10
@3 SD recording status indicator
The status of the SD recording can be checked with
The status of the SD recording can be checked with
this indicator.
When the SD recording starts, this indicator will light
red. When the SD recording stops, this indicator will
go off.
go off.
This indicator will be displayed only when "Manual"
is selected for "Save trigger" on the setup menu.
(☞ Page 31)
(☞ Page 31)
@4 Main area
Images from the camera will be displayed in this
Images from the camera will be displayed in this
area.
The current time and date will be displayed accord-
ing to the settings configured for "Time display for-
mat" and "Date/time display format". (☞ Page 30)
mat" and "Date/time display format". (☞ Page 30)
Click a desired point in the main area on the "Live"
page that is to be the center of the angle of view.
The camera moves to adjust the position in order to
set the clicked point as the center.
The camera moves to adjust the position in order to
set the clicked point as the center.
*1 Only operable by users whose access level is "1.
Administrator"
*2 Only operable by users whose access level is "1.
Administrator" or "2. Camera control" when "On" is
selected for "User auth." (☞ page 50).
selected for "User auth." (☞ page 50).
*3 Operable by users who belong to the access level
selected for "Permission level of audio trans./
recep." on the [Audio] tab of the "Image/Audio"
page. Refer to page 50 for further information about
the access level.
recep." on the [Audio] tab of the "Image/Audio"
page. Refer to page 50 for further information about
the access level.
Note:
• When operated by a lower access level user, images
displayed on the screen may be changed temporari-
ly. This does not affect operation of the camera.
ly. This does not affect operation of the camera.