Panasonic WJ-GXE500E Operating Guide

9

 !4  [Brightness] buttons (*2)
   

: The displayed image will be darker.

   

: The adjusted brightness will return to the

default brightness.

   

: Image will be brighter.

 •  When the [Brightness] buttons are clicked while the

camera is at the preset position, the adjusted bright-
ness will automatically be registered for the current 
preset position.

 
 !5  Preset (*2)
    Select a preset position from the pull-down menu 

and click the [Go] button. The camera will move to 
the selected preset position. When "Home" is 
selected, the camera will move to the home posi-
tion. To activate preset positions and home position, 
it is required to configure the settings on the SETUP 
MENU of camera in advance. (☞ Page 41)

 !6  Unit title
    The unit title entered for "Unit title" on the [Basic] 

tab will be displayed. (☞ Page 30)

 !7  Camera title
    The camera title entered for "Camera title" on the 

[Basic] tab will be displayed. (☞ Page 30)

 !8  [Alarm occurrence indication] button (*2)
    This button will be displayed at an alarm occur-

rence, and the channel of alarm occurrence (one of 
q

 to r buttons) will light. When the button is 

clicked, the button will disappear and the alarm out-
put connector will be reset. (☞ Page 13)

 !9  [Full screen] button
    Images will be displayed on a full screen. To return 

to the "Live" page, press the [Esc] key.

 @0  [One shot] button
    Click this button to take a picture (a still picture). 

The picture will be displayed on a newly opened 
window. When right-clicking on the displayed 
image, the pop-up menu will be displayed. It is pos-
sible to save the image on the PC by selecting 
"Save" from the displayed pop-up menu.

    When "Print" is selected, printer output is enabled.
     

 @1  [Mic input] button (*3)
    Turns on/off the audio reception (hear audio from 

the unit on a PC).

    This button will be displayed only when "Mic input", 

"Interactive(Half-duplex)" or "Interactive(Full-
duplex)" is selected for "Audio transmission/recep-
tion" on the setup menu. (☞ Page 41)

    When this button is clicked, the button will turn into 

the 

 button and audio from the unit will not be 

heard. Audio volume can be adjusted (Low/Middle/
High) by moving the volume cursor 

.

 •  Mic input is available on Ch1 only.
 
 @2  [Audio output] button (*3)
    Turns on/off the audio transmission (play audio from 

the PC on the unit speaker).

    This button will be displayed only when "Audio out-

put", "Interactive(Half-duplex)" or "Interactive(Full-
duplex)" is selected for "Audio transmission/recep-
tion" on the setup menu. (☞ Page 41)

    The button will blink during the audio transmission.
    When this button is clicked, the button will turn into 

the 

 button and audio from the unit will not be 

heard. Audio volume can be adjusted (Low/Middle/
High) by moving the volume cursor 

.

 •  Audio output is available on Ch1 only.
 •  When a user is using the audio transmission func-

tion with "Interactive(Half-duplex)" selected, the 
[Mic input] button and the [Audio output] button will 
be inoperable for the other users. When 
"Interactive(Full-duplex)" is selected, the transmis-
sion button is inoperable for other users.

 •  Possible duration of audio transmission is up to 5

minutes per transmission. When 5 minutes have 
passed, audio transmission will automatically stop. 
To turn the audio transmission function on, click the 
[Audio output] button again.

 •  When the unit is restarted, the adjusted volume level

(for both the audio transmission and reception) will 
return to the level that had been set on the [Audio] 
tab on the setup menu. (☞ Page 41)

 •  Actual volume level will change in three steps even

though the volume cursor can be adjusted minutely.