Panasonic WJ-GXE500E Operating Guide

39

MPEG-4 
(2)

Ch1

Unicast port1(Image) *21

1 024 - 50 000 
(Default: 32 014)

Unicast port2(Audio) *21

1 024 - 50 000 
(Default: 33 014)

Multicast address

Available IPv4 address:  224.0.0.0 - 239.255.255.255
Available IPv6 address:   Multicast address starting

with "FF"

(Default: 239.192.0.21)

Multicast port *21 *22

1 024 - 50 000 
(Default: 37 004)

Ch2 -  
Ch4

Unicast port1(Image) *21

1 024 - 50 000
(Default: [Ch2] 32016 [Ch3] 32018 [Ch4] 32020)

Multicast address

Available IPv4 address: 224.0.0.0 - 239.255.255.255
Available IPv6 address: Multicast address starting with

"FF"

(Default: [Ch2] 239.192.0.23  

[Ch3] 239.192.0.25  
[Ch4] 239.192.0.27)

Multicast port *21

1 024 - 50 000
(Default: [Ch2] 37006 [Ch3] 37008 [Ch4] 37010)

Multicast TTL/HOPLimit 

*23 *24

1 - 254 (Default: 16)

*23

• When two or more network interface cards are installed on the PC in use, the network interface card(s) not

used for receiving images should be invalidated when displaying images using the multicast port.

*24

• When transmitting an MPEG-4 image via a network, the transmitted image sometimes may not be dis-

played depending on the settings of a proxy server or a firewall. In this case, refer to the network adminis-
trator.

*1

• When this setting is changed, the unit will reboot automatically.

*2

• i-PRO Series does not support "D1", if not specified. (As of May, 2010)

*3

• When "On" is selected for "MPEG-4 transmission", the refresh interval may be longer than the set value

when any value with an asterisk (*) on the right is selected.

*4

• When "On" is selected for "MPEG-4 transmission" in "MPEG-4(1)" or "MPEG-4(2)", the transmission inter-

val of JPEG images may be longer.

*5

• When "On" is selected for "MPEG-4 transmission" in "MPEG-4(1)", displaying of MPEG-4 images or JPEG

images on the "Live" page will be available.

*6

• When "On" is selected for "MPEG-4 transmission" in "MPEG-4(1)" and "MPEG-4(2)", MPEG-4 images are

viewable using other devices with each setting.

*7

• When "On" is selected, MPEG-4 images and audio will be transmitted using the HTTP port.

*8

• When "On" is selected, only "Unicast port (AUTO)" will be available for "Transmission type".

*9

• When "On" is selected, MPEG-4 images may not be displayed depending on the number of the concur-

rent access users and audio data availability, etc.

*10

• When "On" is selected, only IPv4 access is available.

*11

• When "On" is selected for either "MPEG-4(1)" or "MPEG-4(2)", the maximum concurrent access number

is equal to or less than 8 users.