Panasonic WJ-GXE500E Operating Guide

40

*12

• When "Frame rate" is set for "Transmission priority", number of users who can access the unit may be

decreased.

*13

• When "Frame rate" is selected for "Transmission priority", this setting is available.

*14

• "Frame rate" is synchronized with "Max bit rate (per client) *". For this reason, the frame rate may be lower

than the specified value when any value marked with an asterisk (*) is selected.

*15

• "Unlimited *" is available when "Frame rate" is selected for "Transmission priority".

*16

• The bit rate is synchronized with "Bandwidth control(bit rate)" on the [Network] tab of "Network" page. For

this reason, the bit rate may be lower than the value when any value with an asterisk (*) on the right is 
selected.

*17

• When "Unlimited *" is selected for either "MPEG-4(1)" or "MPEG-4(2)", the maximum concurrent access

number is 1 user.

*18

• When "Constant bit rate" is selected for "Transmission priority", this setting is available.

*19

• Depending on the setting or photographic subject, images may not be refreshed at the exact designated

interval.

*20

• When "Multicast" is selected, set the value of "Bandwidth control(bit rate)" on the [Network] tab of

"Network" page greater than the total value of "Max bit rate (per client) *" of all the channels in use.

*21

• The following port numbers are unavailable since they are already in use. 

10 669, 10 670

*22

• When audio is transmitted from the unit, the port number to be used will be the multicast port number

plus "1 000".

*25

• When "On" is selected for "MPEG-4 transmission" of "MPEG-4(1)", the setting values selected for

"MPEG-4(1)" will be applied.

Refer to page 28 for general information about this tab.

Ch No.

1/2/3/4

Menu 

On/Off

Operation buttons

Set
Up
Down
Left
Right
Esc
Reset/Special
All Reset

Zoom

Zoom out/x1/Zoom in

Focus

Auto/Near/Far

Control pad