Tandberg Data T40 User Manual

 

12  

Installing the Library 

The library will now continue its power-on sequence.  

 Note 

Keep the transport locking screws in a safe place. You will need them to lock the 
robotics if you need to return your StorageLibrary for service or repair.  

 Caution 

The warranty does not cover damage to the library if transported without the 
transport locking screws properly installed. See 

Reinserting the Transport

 

Locking Screws

 

for instructions on how to reinstall the transport locking screws.   

Figure 4. Recommended Storage of Transport Locking Screws 

  

If the library is to be mounted in a rack, this is the time you should mount the rack mount ears to the 
library. See instructions in 

Mounting the StorageLibrary in a Rack

. 

Mounting the StorageLibrary in a Rack 

The StorageLibrary is designed for use in a 19  rack system using 4U of rack space. The length of the 
power cord and the primary interface cables restrict the placement.  

The StorageLibrary is designed to operate in a horizontal position. Do not attempt to operate the 
StorageLibrary in any other position than horizontally. Also make sure that: 

 

The airflow around the front and back of the StorageLibrary is not obstructed. 

 

There is a minimum of 60cm free space in front of the unit to allow the operator to safely remove 
the magazines. 

 

The display and operator controls can easily be accessed. 

 

The StorageLibrary is away from the floor and in a clean environment with temperatures within 
specifications. For specifications and safety information, see 

Specifications

 and 

Safety and

 

Regulatory Information.

  

The Rack mounting Kit includes the following items: 

 

Rack mount Ears (2 ears and 8 screws M3x4) 

 

Left Rail Assembly 

 

Right Rail Assembly 

 

Screw M6x12 (6 pieces)