DELL 7x0N User Manual

Dell PowerVault 7x0N Systems — Connecting to ATM and FDDI Networks

To display information about all the current FORE/IP PVCs, type the following
command:

A display similar to the following appears:

iface=a5 switch.port=f21a2420.56 vpi.vci=0.114 aal=5

encapsulation=NULL

iface=a5 switch.port=f21a2420.25 vpi.vci=0.113 aal=5

encapsulation=NULL

! /* . +$

You can delete outgoing and incoming FORE/IP PVCs.

To delete an outgoing FORE/IP PVC entry, type the following command:

hostname

is the name or IP address of the remote host.

To delete an incoming FORE/IP PVC for a remote host, use the following command:

2+A

iface

is the name of the interface

vpi

and

vci

have the values of the VPI and VCI of the FORE/IP PVC to be deleted for

the specified interface.

You can connect the filer to one of three available FDDI network configurations.

Table 3 describes the three FDDI configurations you can use, and Table 4 lists the
FDDI cabling requirements:

Single-attached FDDI Fiber or
FDDI-TP card

*Do not exceed the maximum cable length specifications in the appropriate FDDI American National
Standards Institute (ANSI) standard.

Dual-attached
FDDI fiber card

65CNPbk0.book Page 21 Monday, September 13, 1999 1:43 PM