Bosch 4410L User Manual

Disconnect plug from power source
before performing any assembly,

adjustment or repair to avoid possible injury.

1. Locate the 4 Set Screws (A, B, C, & D) on the Rail

Guide Housing. (Figure 1)

2. Loosen the Nut on Set Screw (A) with an

adjustable wrench.

3. Tighten or loosen Set Screw (A) with the 4mm end

of the bit on the multi-purpose tool until you
achieve minimal slide play while maintaining the
desired sliding force.

4. After adjusting Set Screw (A), hold Set Screw (A)

with a 4mm allen key and tighten the nut with an
adjustable wrench without moving the Set Screw.
(Figure 2)

5. Complete steps 2-4 with the remaining set screws

in order as shown in figure 1.